Industrial Gigabit UPoE Splitter

TI-SG104 (Version v1.0R)

Power a non-PoE device up to 100m (328 ft.) away from PSE
Splits a gigabit PoE signal into separate power and data sources
A single Ultra PoE source can power up to two devices
Adjustable voltage output supports 12V, 16V, 24V or 48V devices
For best performance pair with UPoE switches or injectors
Save on installation and equipment cost
Full Duplex Gigabit speeds
IEEE 802.3bt compatible
NDAA / TAA compliant (U.S. and Canada only)

TRENDnet's Industrial Gigabit UPoE Splitter, model TI-SG104, networks a non-PoE device by using a Gigabit Ultra PoE connection and splitting it into separate power and gigabit data sources. The industrial gigabit UPoE splitter can power to up to two devices from a single UPoE source. A convenient DIP switch adjusts output power to 12V, 16V, 24V, or 48V in order to match power requirements for non-PoE devices. The UPoE splitter's dual DC power output provides greater device compatibility.

A technical diagram illustrating an Industrial Gigabit UPoE Splitter setup. The diagram shows a surveillance camera connected via a data cable to the UPoE splitter, which is powered by a DC power source. The splitter is also connected to a UPoE switch through another data cable. The UPoE switch is depicted with multiple ports, with one connected to the splitter. The diagram visually represents the flow of data and power between the camera, splitter, and switch.

UPoE Powered

No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.).

Adjustable Voltage Output

Convenient DIP switch adjusts voltage output to 12V (2.3A), 16V (2.3A), 24V (2.3A) or 48V (1.25A) to match non-PoE device power requirements.

Wall Mountable

The UPoE splitter's wall mountable design accommodates most installation scenarios.

The illustration depicts a network setup within a building, highlighting the connection between a UPoE switch and a TI-SG104 device. The UPoE switch is located inside a server room, connected to multiple server racks. A network cable runs from the UPoE switch to the TI-SG104 device, which is mounted in an enclosure inside the server room. The setup appears to be part of a surveillance system, as indicated by the presence of a security camera mounted on the building's exterior. Additionally, there are parked cars in the adjacent parking area, suggesting that the surveillance system monitors this space. The scene emphasizes the integration of network equipment to support security infrastructure.

Gigabit Ethernet

1 x Gigabit UPoE input port, 1 x Gigabit output port

UPoE Powered

No power adapter necessary; the UPoE splitter takes a UPoE network connection and splits power and data into separate connections to network a non-PoE device with power up to 100m (328 ft.)

Adjustable Voltage Output

Convenient DIP switch adjusts voltage output to 12V (2.3A), 16V (2.3A), 24V (2.3A) or 48V (1.25A) to match non-PoE device power requirements

Dual DC Power Output Terminal Block

The UPoE splitter includes a dual DC power output terminal block, powering for up to two devices

Wall Mountable

Wall mountable design accommodates most installation scenarios

Standards

IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
IEEE 802.3bt compatible

Device Interface

1 x Gigabit port
1 x Gigabit Ultra PoE in port
4-pin removable terminal block (dual DC output)
Adjustable output power DIP switch (48V, 24V, 16V, 12V)
LED indicator
DIN-Rail mount
Wall mount
Grounding point

Data Transfer Rate

Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit: 2000Mbps (full duplex)

Special Features

Hardened components rated for extreme temperatures
Dual DC power output
Auto-Negotiation
ESD 4kV and Surge 2kV protection

Power

Input: 15.4W/30W/60W/95W PoE power
Max. Consumption: 7W (splitter only)
Max. Combined DC Output: 48V (1.25A), 24V (2.3A), 16V (2.3A), 12V (2.3A)

PoE Input	Max. DC Output (split between two devices)
95W	48V(1.25A) DC Output: 60W 24V(2.3A) DC Output: 55W 16V(2.18A) DC Output: 35W 12V(2.25A) DC Output: 27W
60W	48V(1.16A) DC Output: 56W 24V(2.12A) DC Output: 51W 16V(2.18A) DC Output: 35W 12V(2.16A) DC Output: 26W
30W	48V(0.52A) DC Output: 25W 24V(0.95A) DC Output: 23W 16V(1.37A) DC Output: 22W 12V(1.83A) DC Output: 22W
15.4W	48V(0.22A) DC Output: 10.6W 24V(0.44A) DC Output: 10.7W 16V(0.63A) DC Output: 10.2W 12V(0.85A) DC Output: 10.2W

Terminal Block

Dual DC power outputs, 4 pin
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG): 12-24/14-22
Stranded wire (AWG): 12-24/14-22
Torque: 5 lb. – In / 0.5Nm / 0.56Nm
Wire strip length: 7-8mm

DIP Switch

DIP 1	DIP 2	Function
OFF	OFF	48V output
ON	OFF	24V output
OFF	ON	16V output
ON	ON	12V output

MTBF

684,452 hours

Housing

IP30 metal case
DIN-rail mount
Wall mount
Grounding point
4KV ESD protection
2KV surge protection

Operating Temperature

- 40° – 75° C (-40° – 167° F)

Operating Humidity

Max. 95% non-condensing

Dimensions

104 x 82 x 32mm (4.1 x 3.2 x 1.2 in.)

Weight

172g (6 oz.)

Certifications

CE
FCC
IEC EN60950-1
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)

Warranty

3 year

PACKAGE CONTENTS

TI-SG104
Quick Installation Guide
Removable terminal block
DIN-rail and wall mount kit

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.