28-Port Gigabit Web Smart Switch with 10G SFP+ slots

TEG-30284 (Version v2.0R)

Hardware versions of (v2.xR) can be upgraded with the latest firmware to update your model to the latest hardware version.

24 x Gigabit ports
4 x 10G SFP+ slots
Easy-to-use web-based management interface
Supports IPv6, LACP, VLAN, QoS, and IGMP/MLD Snooping
IPv4/IPv6 Static Routing support
Bandwidth control per port
Private, Multicast, and Voice VLAN support
Fanless design ensures silent operation
128Gbps switching capacity
IEEE 802.1p QoS with queue scheduling support
NDAA / TAA compliant (U.S. and Canada only)
Lifetime Warranty*

DISCONTINUED PRODUCT

The TEG-30284 (Version v2.0R) has been discontinued. It has been replaced by the TEG-30284 (Version v2.5R). For a list of discontinued products, click here.

TRENDnet's Gigabit Web Smart Switch series offers advanced L2+ features with enhanced traffic management controls to meet the evolving demands of SMB networks. This rack mountable IPv6-ready managed switch comes with an intuitive web-based interface. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this a powerful solution for SMB networks. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with the easy-to-use voice VLAN feature.

Free up router resources by offloading routing processes to the managed switch by using the L2+ IPv4/IPv6 static routing feature to efficiently route traffic at the switch level. The dynamic ARP inspection feature helps protect connected devices from man-in-the-middle attacks by discarding malicious and invalid ARP packets. Take advantage of the available multicast and IGMP/MLD snooping features to optimize IP surveillance system performance, and minimize network traffic. This TRENDnet Web Smart Managed Switch also feature 10G SFP+ slots to support long-distance fiber networking applications.

The diagram shows two network devices connected to each other with four lines labeled 10G. Three computers are connected to one of the switches.

10G SFP+ Slots

Offers four dedicated 10G SFP+ slots for high-speed network connections, providing a cost-effective solution in adding 10G link capability to an SMB network.

Diagram showing a network switch connected to various network management protocols. A cloud labeled Network connects to five boxes labeled VLAN, IGMP, QoS, RMON, and SNMP, all of which are linked to a network switch below. The switch features several Ethernet ports, illustrating its capability to manage multiple network functions.

Integration Flexibility

Managed switch features include access control lists, VLAN, IGMP/MLD snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration.

A network switch with 28 ports connects two IP networks. On the left, IP Network 1 has two desktop computers, while IP Network 2 on the right also has two computers.

IPv4/IPv6 Static Routing

Free up router resources by offloading routing processes to the managed switch by using the L2+ IPv4/IPv6 static routing feature to efficiently route traffic at the switch level.

The illustration shows a server room with multiple racks containing network switches, each labeled 10G. The room also includes tables with monitors and chairs, indicating a workspace within the server room.

Front view of TEG-30284 network switch with labels for LED indicators, 24 Gigabit ports, and 4 10G SFP+ slots.

Hardware Design

Provides gigabit ports for device connections, 10G SFP+ slots for fiber applications, and a 1U 19” rackmount design with brackets included

10G SFP+ Slots

Offers four dedicated 10G SFP+ slots for high-speed network connections, providing a cost-effective solution in adding 10G link capability to an SMB network

IPv6 Ready

This managed switch supports IPv6 configuration and IPv6 neighbor discovery

Traffic Management

Managed switch features include: Link aggregation, 802.1Q VLAN, Voice VLAN, Multicast VLAN, RSTP, MSTP, Loopback Detection, QoS, and port bandwidth management

IPv4/IPv6 Static Routing

Offload routing processes to the managed switch by using the L2+ IPv4/IPv6 static routing feature to efficiently route traffic at the switch level

Dynamic ARP Inspection

Dynamic ARP inspection feature helps protect connected devices from man-in-the-middle attacks by discarding malicious and invalid ARP packets

Troubleshooting

A convenient cable diagnostic test and traffic statistics aid in network troubleshooting

Access Control

Includes ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUS

Monitoring

RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions

Standards	IEEE 802.1d IEEE 802.1p IEEE 802.1Q IEEE 802.1s IEEE 802.1w IEEE 802.1X IEEE 802.1ab IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3z IEEE 802.3ae IEEE 802.3ab IEEE 802.3ad IEEE 802.3az
Device Interface	24 x Gigabit ports 4 x 10G SFP+ slots LED indicators
Data Transfer Rate	Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit Ethernet: 2000Mbps (full duplex) 10G SFP+: 20Gbps (full duplex)
Performance	Switch fabric: 128Gbps RAM buffer: 1.5MB MAC Address Table: 16K entries Jumbo Frames: 12KB HOL Blocking Prevention Forwarding rate: 95.2Mpps (64-byte packet size)
Management	CLI (Telnet / SSHv2) for basic administration HTTP/HTTPS (SSL v2/3 TLS) Web based GUI SNMP v1, v2c, v3 RMON v1 Static Unicast MAC Address Enable/disable 802.3az Power Saving LLDP and LLDP-MED Virtual Cable Diagnostics Test IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration Dual image and configuration TC Root/Protect
MIB	IP Forward Table MIB RFC 1354 RMON MIB RFC 1271 IPv4 MIB RFC 1213 IPv6 MIB RFC 2465 GVRP MIB IEEE 802.1Q-VLAN LA MIB IEEE 802.3ad LLDP MIB IEEE 802.1ab IGMP Snooping MIB RFC 2933 MLD Snooping MIB RFC 3019 Private VLAN MIB IEEE 802.1Q DHCP SNOOP MIB RFC 2026 QoS MIB RFC 4323 SNMP MIB RFC 3415 STP MIB RFC 4318 PNAC MIB IEEE 802.1x VLAN MIB IEEE 802.1q DNS MIB RFC 1611 ACL MIB Bandwidth CTRL MIB LBD MIB Mirror MIB IPv6 NEIGHBOR MIB SNTP MIB Storm CTRL MIB Statistics MIB Tool MIB Voice VLAN MIB DoS MIB
Spanning Tree	IEEE 802.1D STP (Spanning Tree protocol) IEEE 802.1w RSTP (Rapid Spanning Tree protocol) IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
Link Aggregation	Static Link Aggregation 802.3ad Dynamic LACP
Quality of Service (QoS)	802.1p Class of Service (CoS) DSCP (Differentiated Services Code Point) Bandwidth Control per port Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
VLAN	Multiple management VLAN assignment Asymmetric VLAN 802.1Q Tagged VLAN Dynamic GVRP MAC-based VLAN Protocol-based VLAN Up to 256 VLAN groups, ID Range 1-4094 Private VLAN (Protected Ports) Voice VLAN (10 user defined OUIs)
Multicast	IGMP Snooping v1, v2, v3 (per VLAN) MLD Snooping v1, v2 IGMP fast leave MVR (Multicast VLAN Registration) Static Multicast Address Up to 256 multicast entries
Port Mirror	RX, TX, or Both Many to one
Access Control	802.1X Port-Based Network Access Control, RADIUS, TACACS+ Local Dial-in User Authentication DHCP Snooping (per VLAN) Loopback Detection Duplicated Address Detection Trusted Host Denial of Service (DoS) IP MAC port binding Dynamic ARP inspection Block unknown multicast
ACL IPv4 L2-L4 & IPv6	MAC Address VLAN ID Ether Type (IPv4 only) IP Protocol 0-255 TCP/UDP Port 1-65535 802.1p DSCP (IPv4 only) IPv6 Address (IPv6 only)
Layer 3 Features	IPv4 / IPv6 static routing IP interfaces: Up to 6 Routing table entries: Up to 32 (IPv4 / IPv6) ARP table (up to 128 entries) Inter-VLAN routing
Compatibility	Optional Software Utility: Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003/2008 2016 Server Compatibility
Special Features	10G SFP+ slots Fanless Design IPv6 802.3az power saving Rack mountable
Power	Input: 100 - 240V AC, 50/60Hz, internal power supply Max. consumption: 22.8W
MTBF	948,066 hours
Operating Temperature	-5° – 50° C (23° – 122° F)
Operating Humidity	Max. 95% non-condensing
Dimensions	440 x 140 x 44mm (17.32 x 5.51 x 1.74 in.) Rack mountable 1U height
Weight	2.09kg (4.61 lbs.)
Certifications	CE FCC
Warranty	3-year

PACKAGE CONTENTS

TEG-30284
Quick Installation Guide
Power cord (1.8m / 6 ft.)
Rack mount kit

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.