10 dBi Wireless N300 Outdoor PoE Access Point

TEW-740APBO (Version v1.0R)

  • Wireless N300 building-to-building networking (2.4 GHz)
  • Supports Access Point (AP), Wireless Distribution System (WDS), Repeater, and Wireless Client modes
  • IP67 rated housing
  • Built in 10 dBi directional sector antenna

TRENDnet's 10 dBi Outdoor PoE Access Point, model TEW-740APBO, provides Wireless N300 building-to-building connectivity. A variety of installation scenarios are facilitated with Access Point (AP), Wireless Distribution System (WDS), Repeater, and CPE + AP modes. The IP67 rated housing comes with wall and pole mounting hardware.

Illustration of a preconfigured point-to-point bridge with two structures emitting wireless signals, indicating connectivity.

Point-to-Point

Wireless N300 building-to-building networking (2.4 GHz)

Illustration of a signal tower on the left emitting a wireless signal. The 10 dBi Wireless N300 Outdoor PoE Access Point TEW-740APBO is facing the signal tower. The access point is connected to a network switch, which has two laptops and two surveillance cameras connected to it.

Installation Flexibility

Supports Access Point (AP), Wireless Distribution System (WDS), Repeater, and Wireless Client modes

Two symbols indicating IP67 rating. The first symbol represents water resistance, and the second symbol indicates dust protection.

Outdoor Ready

IP67 rated housing

The illustration shows a TRENDnet outdoor networking device from three different angles with labeled features. These features include IP67 weather-rated, waterproof RJ-45 kit, mounting point, grounding point, Ethernet port, reset button, and LED indicators.
Performance

Multi-Mode Support

Supports Access Point (AP), Wireless Distribution System (WDS), Repeater, and Wireless Client modes

Wireless N300 (2.4 GHz)

Compliant with 802.11n/g/b technology (2.4 GHz) with data rates up to 300 Mbps*

Outdoor Rated

Durable enclosure with an IP67 outdoor weather rating

Directional Antenna

Built in 10 dBi directional antenna

Power over Ethernet (PoE)

Comes with a proprietary PoE injector, so that it can connect a regular non-PoE switch

Logs

Real time logs and statistics help troubleshooting

Encrypted Wireless

Support for wireless encryption of up to WPA2

Multiple SSIDs

Create up to eight additional SSIDs

Compatibility

Compatible with legacy wireless devices

Mounting Hardware

Pole and wall mount hardware included

Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1X
  • IEEE 802.11d
  • IEEE 802.11e
  • IEEE 802.11f
  • IEEE 802.11h
  • IEEE 802.11i
  • IEEE 802.11b
  • IEEE 802.11g
  • IEEE 802.11n (2.4 GHz up to 300 Mbps)
Hardware Interface
  • 1 x 10/100 Mbps port (proprietary PoE max. cable length 70 m)
  • Reset button
  • LED indicators
Special Features
  • IP67 weather rated
  • 802.1Q VLAN assignment per SSID
  • DDNS support for dyn.com, no-ip.com
  • Schedule radio on / off time policy
Access Control
  • Wireless encryption: WEP, WPA / WPA2-PSK, WPA / WPA2-RADIUS
  • Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP / L2TP / IPsec VPN Passthrough
  • Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting
  • 802.1Q VLAN
QoS
  • WMM
  • Diffserv (DSCP) / ToS
  • 802.1p / CoS
Operation Modes
  • Access Point (AP)
  • Wireless Distribution System (WDS)
  • AP + WDS
  • Repeater
  • CPE + AP
SSID
  • Up to 8 SSIDs
Internet Connection Types (CPE mode)
  • Dynamic IP (DHCP)
  • Static IP (Fixed)
  • PPPoE (Dynamic IP / Static IP)
  • PPTP (Dynamic IP / Static IP)
Management / Monitoring
  • Local / remote web based management (HTTP, HTTPS)
  • Local / remote CLI based management (Telnet, SSH)
  • SNMP v1 / v2c / v3
  • SNMP Trap
  • MIB II
  • Upgrade firmware
  • Backup / restore configuration
  • Event logging
  • Reboot
  • Restore to factory defaults
  • Ping test
  • Ping Watchdog
Routing
  • Static
  • Dynamic (RIP v1/2, OSPF)
Frequency
  • FCC: 2.412 - 2.462 GHz
  • ETSI: 2.412 – 2.472 GHz
  • IC: 2.412 - 2.462 GHz
Wireless Channels
  • FCC: 1-11
  • ETSI: 1-13
Modulation
  • 802.11b: DBPK, DQPSK, CCK with DSSS
  • 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
Media Access Protocol
  • CSMA/CA with ACK
Antenna Gain
  • 10 dBi internal sector antenna
Wireless Output Power / Receiving Sensitivity
  • 802.11b: FCC / ETSI: FCC: 28 dBm (max.), ETSI: 10.6 dBm (max.), IC: 28 dBm (max.) / -88 dBm (typical) @ 11 Mbps
  • 802.11g: FCC / ETSI: FCC: 27 dBm (max.), ETSI: 10.7 dBm (max.), IC: 27 dBm (max.) / - 74 dBm (typical) @ 54 Mbps
  • 802.11n: FCC / ETSI: FCC: 28 dBm (max.), ETSI: 10.7 dBm (max.), IC: 28 dBm (max.) / - 69 dBm (typical) @ 300 Mbps
Power
  • Input: 100 – 220 V, 50 - 60 Hz, 0.6 A
  • Output: 48v / 0.5A
  • Consumption: 22 Watts Max.
Operating Temperature
  • -30 - 60° C (-22 - 140° F)
Operating Humidity
  • Max. 99% non-condensing
Certifications
  • CE
  • FCC
Dimensions
  • 218 x 125 x 54 mm (8.6 x 4.9 x 2.1 in.)
Weight
  • 424 g (0.9 lbs.)
Warranty
  • 3 year limited

PACKAGE CONTENTS
  • TEW-740APBO
  • CD-ROM (Utility & User's Guide)
  • Quick Installation Guide
  • Power adapter (48 V DC, 0.5 A)
  • Proprietary PoE injector
  • Waterproof RJ-45 kit
  • Grounding wire
  • Mounting hardware

* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.