10 dBi Outdoor PoE Access Point

TEW-738APBO (Version v1.3R)

Wireless N300 building-to-building networking (2.4 GHz)
Supports Access Point (AP), Wireless Distribution System (WDS), Repeater, and CPE + AP modes
IP67 rated aluminum housing
Built in 10 dBi directional sector antenna

DISCONTINUED PRODUCT

The TEW-738APBO (Version v1.3R) has been discontinued. It has been replaced by the TEW-740APBO (Version v3.0R). For a list of discontinued products, click here.

TRENDnet's 10 dBi Outdoor PoE Access Point, model TEW-738APBO, provides Wireless N300 building-to-building connectivity. A variety of installation scenarios are facilitated with Access Point (AP), Wireless Distribution System (WDS), Repeater, and CPE + AP modes. The rugged aluminum IP67 rated housing comes with wall and pole mounting hardware.

Two setups for wireless internet service using TRENDnet devices: Wireless Internet Service (CPE Mode) showing a TRENDnet device receiving a signal from a WISP Tower, and Building-to-Building (WDS Mode) showing two TRENDnet devices communicating wirelessly between buildings. A PoE injector with connections for PoE and 10/100 Ethernet is also highlighted.

Performance

Multi-Mode Support

Supports Access Point (AP), Wireless Distribution System (WDS), WDS + AP, Repeater, and CPE + AP modes

Wireless N300 (2.4 GHz)

Compliant with 802.11n/g/b technology (2.4 GHz) with data rates up to 300 Mbps*

Outdoor Rated

Durable aluminum enclosure with an IP67 outdoor weather rating

Directional Antenna

Built in 10 dBi directional antenna

Power over Ethernet (PoE)

Comes with a proprietary PoE injector, so that it can connect a regular non-PoE switch

Logs

Real time logs and statistics help troubleshooting

Encrypted Wireless

Support for wireless encryption of up to WPA2

Multiple SSIDs

Create up to seven additional SSIDs

Compatibility

Compatible with legacy wireless devices

Mounting Hardware

Pole and wall mount hardware included

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.1d IEEE 802.1p IEEE 802.1Q IEEE 802.1X IEEE 802.11d IEEE 802.11e IEEE 802.11f IEEE 802.11h IEEE 802.11i IEEE 802.11b IEEE 802.11g IEEE 802.11n (2.4GHz up to 300 Mbps)
Hardware Interface	1 x 10/100 Mbps (proprietary PoE) port** Reset button LED indicators
Special Features	IP67 weather rated 802.1Q VLAN assignment per SSID DDNS support for dyn.com, dhs.org, osd, tzo.com Schedule radio on/off time policy
Access Control	Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting 802.1Q VLAN
QoS	WMM Diffserv (DSCP)/ToS 802.1p/CoS
Operation Modes	Access Point (AP)/WDS+AP Wireless Distribution System (WDS) Repeater CPE + AP (WISP)
SSID	Up to 8 SSIDs
Internet Connection Types (CPE mode)	Dynamic IP (DHCP) Static IP (Fixed) PPPoE (Dynamic IP/Static IP) PPTP (Dynamic IP/Static IP)
Management/Monitoring	Local/remote web based management (HTTP, HTTPS) Local/remote CLI based management (Telnet, SSH) SNMP v1/v2c/v3 SNMP Trap MIB II Upgrade firmware Backup/restore configuration Event logging Reboot Restore to factory defaults Ping test Ping Watchdog
Routing	Static Dynamic (RIP v1/2, OSPF)
Frequency	FCC: 2.412 - 2.462 GHz ETSI: 2.412 – 2.472 GHz
Wireless Channels	FCC: 1-11 ETSI: 1-13
Modulation	802.11b: DBPK, DQPSK, CCK with DSSS 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
Media Access Protocol	CSMA/CA with ACK
Antenna Gain	10 dBi internal sector antenna
Wireless Output Power/Receiving Sensitivity	802.11b: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.6 dBm (max.)/-88 dBm (typical) @ 11 Mbps 802.11g: FCC/ETSI: FCC: 27 dBm (max.), ETSI: 10.7 dBm (max.)/- 74 dBm (typical) @ 54 Mbps 802.11n: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.7 dBm (max.)/- 69 dBm (typical) @ 300 Mbps
EIRP	FCC: up to 38 dBm (with built in 10 dBi antenna) ETSI: up to 20 dBm (with built in 10 dBi antenna)
Power	Input: 100 – 220 V, 50 - 60 Hz, 0.6 A Output: 48 V, 0.5 A Consumption: 22 Watts max.
Operating Temperature	-30 - 60° C (-22 - 140° F)
Operating Humidity	Max. 99% non-condensing
Certifications	CE FCC
Dimensions	215 x 122 x 66 mm (8.5 x 4.8 x 2.6 in.) (not including mounting bracket)
Weight	0.8 kg (1.8 lbs.)
Warranty	3 year limited

PACKAGE CONTENTS

TEW-738APBO
CD-ROM (User's Guide)
Multi-Language Quick Installation Guide
Mounting hardware
Proprietary PoE injector
Water-proof RJ-45 plug (Network cable not included)
Power adapter (48V, 0.5A)

* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
** Recommended max. PoE cable length of 70 m.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.