10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit

TEW-740APBO2K (Version v3.0R)

Wireless N300 point-to-point networking (2.4 GHz)
Includes two preconfigured wireless N access points
IP56 outdoor weather rated housing
Built-in 10 dBi directional antenna
Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes
Proprietary PoE power adapters included
1 x 10/100Mbps PoE-in port, and 1 x 10/100Mbps port

TRENDnet's 10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit, model TEW-740APBO2K, is the easiest way for you to provide long-distance, point-to-point wireless connectivity. The long-range outdoor access point kit is ideal for use with building-to-building communications, utility poles, surveillance solutions, and more.

Reduce installation time and infrastructure costs. This preconfigured directional point-to-point bridge kit is ready to install out of the box, with no additional WiFi configurations required*. Conveniently link two locations together with Wireless N300 speeds and performance, especially when you are unable to run network cables.

The durable access point housing is IP56 weather rated housing, and designed and tested for harsh, outdoor environments. This long-range outdoor access point bridge kit features built-in, high-performance 10 dBi antennas, and conveniently includes both wall and pole mounting hardware for installation flexibility.

*For future troubleshooting, we recommend assigning the APs valid IP addresses within your existing network.

Preconfigured Point-to-Point Bridge

Reduce installation cost and setup time with this preconfigured, and pre-encrypted long-range outdoor wireless access point bridge kit.

The setup shows a power adapter and LAN cables connecting to a device. On the left, a device has ports labeled for power and data output with a magnified view highlighting these ports. On the right, a power adapter features a port for power adapter input and two LAN ports for data input, with cables indicating where they should be plugged in.

PoE Power Adapter

Included passive PoE injector provides power and data over a single Ethernet cable with a maximum distance of 20m (66 ft.).

Graphic with two symbols and a label indicating IP56 rating. The first symbol represents dust protection, and the second symbol indicates water resistance. Below the symbols, IP56 is displayed in bold, signifying protection from dust particles and water.

Outdoor Ready

Durable enclosure with an IP56 outdoor weather rating, and an operating temperature range of -22° – 60° C (-7.6° – 140° F).

The illustration depicts two buildings with a wireless connection established between them using two devices labeled TEW-740APBO. The devices are mounted on the exterior walls of each building, and a blue beam represents the wireless link. The scene includes people engaging in various activities such as sitting at tables, walking, and riding a bicycle in the courtyard between the buildings.

The illustration shows a TRENDnet device with labeled components. The device appears to be an outdoor-rated network device with various ports and indicators. The left side of the image shows the front bottom view of the device, while the right side shows the back bottom view with detailed labels for each component. The labels include outdoor-rated, LED indicators, 10/100 Mbps port, reset button, 10/100 Mbps PoE port, and grounding point.

Preconfigured Kit

Reduce installation and setup time with this preconfigured and pre-encrypted long-range outdoor wireless access point bridge kit

Wireless N300 (2.4 GHz)

Compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300Mbps*

Outdoor Rated

Durable enclosure with an IP56 outdoor weather rating, and an operating temperature range of -22° – 60° C (-7.6° – 140° F) featured on this long-range outdoor access point kit

Directional Antenna

Built-in 10 dBi directional antenna in each long-range outdoor access point

PoE Power Adapter

Included passive PoE injector provides power and data over a single Ethernet cable with a maximum distance of 20m (66 ft.)

Mounting Hardware

Pole and wall mount hardware included

LED Indicators

LEDs on the long-range outdoor access points convey wireless link quality in WISP mode

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.1d IEEE 802.1p IEEE 802.1Q IEEE 802.1X IEEE 802.11d IEEE 802.11e IEEE 802.11f IEEE 802.11h IEEE 802.11i IEEE 802.11b IEEE 802.11g IEEE 802.11k IEEE 802.11n (2.4GHz up to 300Mbps) IEEE 802.11r
Hardware Interface	1 x 10/100Mbps LAN1 port (proprietary PoE max. cable length 20m (66 ft.)) 1 x 10/100Mbps LAN2 port LED indicators Reset button Grounding Point
Special Features	IP56 weather rated 802.1Q VLAN assignment per SSID Schedule radio on/off time policy 802.11r / 802.11k fast roaming Preconfigured point-to-point bridge kit
Access Control	Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-Enterprise, 802.1X Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting 802.1Q VLAN OAuthentication 2.0 / Walled Garden for guest authentication Customizable captive portal for guest authentication
QoS	WMM
Operation Modes	Access Point (AP) Access Point (AP) + WDS Wireless Distribution System (WDS) WISP (CPE) + AP Client Bridge + AP Router Control AP (CAP)
SSID	Up to 7 SSIDs
Internet Connection Types (WISP (CPE) + AP & Router modes)	Dynamic IP (DHCP) Static IP (Fixed) PPPoE (Dynamic IP/Static IP) PPTP (Dynamic IP/Static IP)
Management/Monitoring	Local/remote web-based management (HTTP, HTTPS) Local/remote CLI based management (Telnet, SSH) SNMP v2c/v3 SNMP Trap Upgrade firmware Backup/restore configuration Event logging Authentication log Reboot Restore to factory defaults Ping test Traceroute LED Control
Frequency	FCC: 2.412 - 2.462GHz ETSI: 2.412 – 2.472GHz IC: 2.412 - 2.462GHz
Wireless Channels	FCC: 1-11 ETSI: 1-13
Modulation	802.11b: DBPK, DQPSK, CCK with DSSS 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
Media Access Protocol	CSMA/CA with ACK
Antenna Gain	10 dBi internal sector antenna
Wireless Output Power	802.11b: FCC: 26 dBm (max.) / CE: 10.4 dBm (max.) / IC: 26 dBm (max.) @ 11Mbps 802.11g: FCC: 25 dBm (max.), CE: 10.5 dBm (max.) / IC: 25 dBm (max.) @ 54Mbps 802.11n: FCC: 28 dBm (max.), CE: 10.6 dBm (max.) / IC: 28 dBm (max.) @ 150Mbps 802.11n: FCC: 27 dBm (max.), CE: 10.6 dBm (max.) / IC: 27 dBm (max.) @ 300Mbps
Receiving Sensitivity	802.11b: -88 dBm (typical) @ 11Mbps 802.11g: -74 dBm (typical) @ 54Mbps 802.11n: -71 dBm (typical) @ 150Mbps 802.11n: -69 dBm (typical) @ 300Mbps
Power	Input: 100 – 220V AC, 50/60Hz, 0.5A Output: 12V DC, 1A proprietary/passive PoE injector Max. Consumption: 6.6W
Operating Temperature	-22° – 60° C (-7.6° – 140° F)
Operating Humidity	Max. 99% non-condensing
Certifications	FCC CE IC
Dimensions	195 x 118 x 61mm (7.6 x 4.6 x 2.4 in.) per access point
Weight	304g (10.7 oz.) per access point
Warranty	3 year

PACKAGE CONTENTS

2 x TEW-740APBO
Quick Installation Guide
Proprietary/Passive PoE injectors
Power adapters (12V DC, 1A)
Grounding wires
Mounting hardware
2 X Rubber seals

* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally, environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.