TRENDnet Store

Industrial AC1200 Wireless Gigabit PoE+ Router

TI-WP100 (Version v1.0R)

  • Industrial AC1200 Dual-Band Wireless
  • 4 x Gigabit PoE+ ports, 1 x Gigabit WAN port
  • PoE power budget: 120W@48V DC input, 120W@24V DC input
  • PoE alive check restarts unresponsive PoE powered devices
  • PoE power scheduling, power limit, and port priority
  • Hardened IP30 rated metal housing
  • Operating temperature range of -30° – 70° C (-22° – 158° F)*
  • Up to 8 SSIDs per band
  • SSID to VLAN mapping
  • Wireless WAN support (WAN load balancing/failover between wired Ethernet WAN and Wireless WAN)
  • 802.1Q/Port-based VLAN support
  • Inter-VLAN routing
  • IPsec & SSL VPN (OpenVPN) support
  • Redundant power inputs with overload current protection
  • Digital input/output
  • Modbus serial port and virtual COM support
  • Power supply sold separately (models: TI-S15052, TI-S24052, TI-S12048, TI-S12024, TI-S24048)
  • Optional Magnetic WiFi Antenna base, model TEW-LB101 (sold separately)
  • NDAA / TAA compliant
NDAA/TAA Compliant
Price: $571.99
Quantity:
Wishlist

TRENDnet’s Industrial AC1200 Wireless Dual Band Gigabit PoE+ Router, model TI-WP100, features dual-band AC1200 WiFi to maximize device networking speeds; it is equipped with an 867Mbps Wireless AC network, and a 300Mbps Wireless N network. It supports dual-WAN hybrid connections (Ethernet for load balancing or fail-over modes, and encrypted Virtual Private Network (VPN) access for remote users). Four gigabit PoE+ ports enable users to power access points, IP cameras, and other PoE+ devices directly from the router. Supports both PoE (802.3af) and PoE+ (802.3at) devices with a 120W PoE power budget. The Industrial AC1200 gigabit router is equipped with an IP30 rated metal housing, and designed to operate within a wide temperature range of -30° – 70° C (-22° – 158° F) for industrial environments.

Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. This wireless router features advanced management, QoS, VLAN, VPN, and other capabilities to ensure optimal performance, scalability, and protection of your network. Intelligently manage your offices’ web access with our advanced contenting filtering tool, increase employee productivity, and finally take control of your internet.

Network setup with dual ISPs connected to a single router supporting both Ethernet and Wi-Fi connections.

Dual-WAN

Connect up to two separate WAN internet connections (Ethernet & WiFi) to efficiently load-balance traffic, or configure for redundancy using the WAN fail-over mode.

Diagram of a network device connected to four security cameras, each labeled with '30W,' indicating power consumption or power supply through Power over Ethernet (PoE).

PoE+

Four gigabit PoE+ ports power APs, IP cameras, and other PoE+ devices directly from the router. Supports both PoE (802.3af) and PoE+ (802.3at) devices with a 120W PoE power budget.

Line art of Industrial AC1200 Wireless Dual Band Gigabit Router. It emits signal waves from both sides, suggesting wireless activity. The left side waves are labeled ‘300Mbps,’ and the right side waves are labeled ‘867Mbps,’ indicating different speeds of data transmission.

AC1200 WiFi

Features dual-band AC1200 WiFi to maximize device networking speeds; it’s equipped with an 867Mbps Wireless AC network, and a 300Mbps Wireless N network.

The diagram shows an industrial setup with various components and connections. In the center, there is a machine connected to a conveyor system. To the left, there is another machine connected to the conveyor. On the right side, there is a control panel labeled TI-WP100 with a zoomed-in view showing internal components and wiring. Above the control panel, a label reads TEW-LB101 sold separately. Below the control panel, there is a SCADA server in a blue circle. To the left of the SCADA server, there is a computer also in a blue circle. Both the computer and the SCADA server are wirelessly connected to the control panel TI-W100. The entire setup is within a room with walls and machinery, indicating an industrial environment.
The visual shows a TRENDnet device with detailed labels for its various components and accessories. The front view of the device includes an 8-pin removable terminal block for primary/RPS power inputs and digital input/output, LED indicators, a USB 2.0 port for log storage, a reset button, four gigabit ports, a gigabit WAN port, a 4-pin removable terminal block for RS-232/RS-485 serial port (Modbus), and four RP-SMA antenna connectors (two for 2.4GHz/5GHz WLAN and two for 5GHz). The back view of the device highlights the DIN-Rail mount. The accessories shown include four detachable dual-band antennas and a network cable measuring 1.5 meters or 5 feet.

Dual-WAN

Connect up to two separate WAN internet connections (Ethernet & WiFi) to efficiently load-balance traffic by distributing network traffic over the wired and wireless WAN connections, or configure for redundancy using the WAN fail-over mode

Dual-Band WiFi

Features dual-band WiFi to maximize device networking speeds; it’s equipped with an 867Mbps 802.11ac network, and a 300Mbps Wireless N network

Gigabit PoE+

Four gigabit PoE+ ports allow users to power access points, IP cameras, and other PoE+ devices directly from the router. Supports both PoE (802.3af) and PoE+ (802.3at) devices with a 120W total PoE power budget

Ports

4 x Gigabit PoE+ ports, 1 x Gigabit WAN port

Pre-Encrypted Wireless

For your convenience the router’s WiFi bands are pre-encrypted with their own unique passwords

VPN

Supports IPsec and SSL VPN protocols for encrypted remote access to local area network (LAN) resources over the internet

Inter-VLAN Routing

Provides routing capabilities between VLANs

QoS

Intelligently prioritize voice, video, and other data traffic to improve network efficiency and overall performance

DIN-Rail Mount

Metal enclosure with integrated DIN-rail mount

Management

Supports web browser (HTTP, HTTPS), CLI (Telnet / SSHv2), SNMP, and TR-069 management

Wide Temperature Range

A wide operating temperature range of -30° – 70° C (-22° – 158° F)*allows for installations in extreme hot or cold environments

Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3ab
  • IEEE 802.1Q
  • IEEE 802.1X
  • IEEE 802.11a
  • IEEE 802.11b
  • IEEE 802.11g
  • IEEE 802.11n (up to 300Mbps @ 256QAM)*
  • IEEE 802.11ac (5GHz: up to 867Mbps @ 256QAM)*
  • IEEE 802.3af
  • IEEE 802.3at
Device Interface
  • 4 x Gigabit PoE+ ports
  • 1 x Gigabit WAN port
  • 2 x Wireless WAN uplink (2.4GHz or 5GHz)*
  • 1 x USB 2.0 (Log Storage)
  • 4 x RP-SMA antenna connectors (2 x 2.4GHz/5GHz WLAN, 2 x 5GHz)
  • 8-pin removable terminal block (primary/RPS power inputs & digital input/output)
  • 4-pin removable terminal block RS-232/RS-485 serial port (Modbus)
  • LED indicators
  • Reset button
Performance
  • NAT (LAN-to-WAN) throughput: 900Mbps
  • Routing performance: 900Mbps
  • Maximum concurrent sessions: 32,000
  • Maximum number of VLANs: 4 (ID: 1-4091)
  • IPsec VPN (AES-256/SHA-256/LAN-to-LAN) throughput: 160Mbps
  • SSL VPN (OpenVPN®) Throughput (Blowfish/SHA-1/Server): 20Mbps
VPN
  • SSL VPN Tunnels: Up to 2
  • IPsec VPN Tunnels: Up to 16 tunnels
  • SSL OpenVPN Modes: Server, Client
  • SSL OpenVPN Encryption: Blowfish, AES-128/192/256
  • SSL OpenVPN Authorization: TLS with RSA, Static Key
  • SSL OpenVPN Hash Algorithm: MD4, MD5, SHA-1/256/512
  • IPsec VPN Modes: Site-to-Site, Client-to-Site or Dynamic VPN
  • IPsec Encryption: DES, 3DES, AES-128/192/256
  • IPsec Hash Algorithm: MD5, SHA-1/256
  • IPsec Key Exchange: IKEv1/2, Main/Aggressive Mode, Pre-shared key, X.509, DH Groups 1/2/5/14-18
  • IPsec Protocols: ESP/AH, PFS DH Groups 1/2/5/14-18, X-AUTH, DPD, Local/Remote ID: FQDN, User@FQDN, Key ID
  • IPsec NAT Traversal
Networking
  • WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled)
  • NAT Loopback Enable/Disable
  • NAT Modes: NAT, PAT, One-to-One NAT
  • VLAN tag assignment on WAN interface
  • IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP
  • Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels
  • IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6), Link-Local, PPPoE
  • VLAN ID assignment on WAN interface
  • IGMP proxy on WAN interface
  • WAN IP address alias
  • Routing: Static (Up to 64 entries), RIPv1/v2, OSPFv2, BGP4
  • Static ARP (Up to 32 entries)
  • VLAN: Port-based, 802.1Q (Up to 4 VLANs, 4 IP interfaces)
  • Inter-VLAN Routing
  • SSID per VLAN assignment
  • DHCP Server, Relay, Options 42/66/72/114/150/160
  • Dynamic DNS: dyn.com, no-ip.com
  • WAN Failover
  • Networking monitoring for WAN load balancing (DNS query or ICMP, latency threshold, fail threshold, query threshold)
  • WAN Traffic load balancing: Smart Weight (Automatic), Specific Weight Percentage, User defined traffic policy
  • VPN passthrough: IPsec, PPTP, L2TP
  • Up to 8 SSIDs per band
  • AP Router, WDS only, and WDS hybrid modes
  • WiFi scheduling
  • 5G WiFi bandsteering
Access Control
  • Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-RADIUS
  • Wireless IDS
  • Certificate management (Root CA, SCEP, Local certificate, self-signed, RSA, Import PEM certificates)
  • NAT/SPI, virtual server/port forwarding, port triggering, firewall traffic rules, DMZ host, allow/deny ping on WAN interfaces
  • ALG: PPTP/L2TP/IPsec VPN passthrough
  • MAC filtering
  • Custom scheduling for access control rules
  • MMI (max. password attempts, login timeout, HTTP/HTTPS, HTTPS certificate, HTTP compares/binding)
  • Wireless client isolation
  • Stealth Mode
  • DoS prevention
Quality of Service
  • Software-based priority queues
  • Hardware-based bandwidth control
  • WMM
Management
  • HTTP/HTTPS web-based GUI
  • CLI: Telnet / SSHv2
  • Command script
  • TR-069/STUN
  • SNMP v1, v2c, v3
  • SNMP trap (up to 4 receivers)
  • Modbus Slave, gateway for TCP, and RTU/ASCII master/slave access
  • Virtual COM RFC2217, TCP client, TCP server, UDP
  • Data logging (sniffer, offline proxy, full-time proxy)
  • Device configuration backup & restore, upgrade firmware, reboot, and reset to default
  • Scheduled auto reboot
  • Auto restore configuration
  • Set custom UI logo
  • Set custom CSS
  • Wake-on-LAN (WoL)
  • Diagnostic tools: Built-in ping, traceroute, speed test, and packet capture utilities
  • Event configuration and management: digital input/output, Modbus, syslog, SNMP trap, email alert, reboot
  • System time settings (NTP, manually set, or copy from PC, time zone, and daylight savings time)
  • FTP/FTPS/SFTP server
  • Creates groups (IP, MAC, or host name), external server object definition
MIB
  • MIB II RFC 1213
Frequency
  • 2.412 - 2.462GHz
  • 5.150 – 5.250GHz, 5.725 – 5.850GHz
Modulation
  • 802.11b: CCK, DQPSK, DBPSK
  • 802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM
  • 802.11n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM with OFDM
  • 802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM
Media Access Protocol
  • CSMA/CA with ACK
Antenna Gain
  • 4 x 2.4GHz 2.5dBi / 5GHz: 3.5 dBi dual-band detachable/external
Wireless Output Power (max output power without antenna gain)
  • 802.11a: FCC: 21 dBm (max.) / ETSI: 17.38 dBm (max.)
  • 802.11b: FCC: 26 dBm (max.) / ETSI: 17.38 dBm (max.)
  • 802.11g: FCC: 23 dBm (max.) / ETSI: 17.38 dBm (max.)
  • 802.11n (2.4GHz): FCC: 21 dBm (max.) / ETSI: 14.38 dBm (max.)
  • 802.11n (5GHz): FCC: 21 dBm (max.) / ETSI: 16.4 dBm (max.)
  • 802.11ac: FCC: 21 dBm (max.) / ETSI: 16.4 dBm (max.)
Receiving Sensitivity
  • 802.11a: -68 dBm (typical) @ 54Mbps
  • 802.11b: -83 dBm (typical) @ 11Mbps
  • 802.11g: -70 dBm (typical) @ 54Mbps
  • 802.11n (2.4GHz): -66 dBm (typical) @ 300Mbps
  • 802.11n (5GHz): -64 dBm (typical) @ 300Mbps
  • 802.11ac: -55 dBm (typical) @ 867Mbps
Wireless Channels
  • 2.4GHz: FCC: 1 – 11, ETSI: 1 – 13
  • 5 GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165; ETSI: 36, 40, 44, 48
Power
  • PWR (Primary) terminal input: 24 – 56V DC
  • RPS (Redundant) terminal input: 24 – 56V DC
  • Digital Input: Logic 0: 0V-2V, Logic 1: 5V-30V
  • Digital Output: Relay Mode, up to 30V/1A
  • Compatible power supply: TI-S15052 (150W), TI-S24052 (240W), TI-S12048 (120W), TI-S12024 (120W), TI-S24048 (240W) sold separately
  • Max. Consumption: 20W (no PoE load), 140W (full PoE load)
PoE
  • PoE budget: 120W@48V DC input, 120W@24V DC input
  • 802.3at: Up to 30W per port
  • PoE Mode A: Pins 1, 2, 3, and 6 for power
  • PoE auto classification
  • PoE port priority/power limit/power scheduling/PD alive check
  • Over current/short circuit protection
Terminal Block
  • Redundant power inputs, alarm relay contact, 8 pin
  • Wire range: < 2.5 mm^2
  • Solid wire (AWG): 12-24
  • Stranded wire (AWG): 12-24
  • Wire strip length: 5mm
Enclosure
  • IP30 rated metal enclosure
  • Fanless passive cooling
  • DIN-Rail mount
  • Grounding point
  • ESD (Ethernet) Protection: 8KV DC
  • Surge (Power) Protection: 2KV DC
MTBF
  • 333,367 hours @ 25° C
  • 222,166 hours @ 70° C
Operating Temperature
  • -30° – 70° C (-22° – 158° F)*
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 160 x 120 x 51mm (6.3 x 4.72 x 2.01 in.)
Weight
  • 1.09kg (2.4 lbs.)
Certifications
  • CE
  • FCC
  • Freefall (IEC 60068-2-32)
Warranty
  • 3 year

PACKAGE CONTENTS
  • TI-WP100
  • Quick Installation Guide
  • 4 x detachable dual-band antennas
  • Network cable (1.5m / 5 ft.)
  • 1 x 8-pin removable terminal block (Power & digital input/output)
  • 1 x 4-pin removable terminal block (Serial)
  • DIN-Rail mounting bracket

*WiFi performance will be degraded if device ambient temperature is above 60° C.
**Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. For maximum performance of up to 867Mbps use with a 867Mbps 802.11ac wireless adapter. For maximum performance of up to 300 Mbps, use with a 300 Mbps 802.11n wireless adapter.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.