VDV & USB Cable Tester

TC-NT3 (Version v1.0R)

Comprehensive cable tester for network professionals
Tests voice, data, video, and USB cables
Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.)
Identifies severed, short circuit, and cross connected pins
Quick pass/fail for large test quantities
Blinking Hub/Switch Mode identifies connected hub/switch port
Convenient travel case
NDAA / TAA compliant (U.S. and Canada only)

TRENDnet's VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case.

Hardware

Cables and Ports

Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables

PIN Tests

Identifies proper, severed, short circuit, and cross connected pins

TX/RX Troubleshooting

Displays separate TX and RX results for more efficient troubleshooting

Local and Remote Testing

A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit

Continuous Scan

Continuous scan mode is design to accommodate testing with cable ends in different locations

Manual Scan

Manual scan is well suited for loop back cable testing

Quick Test Mode

Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type

Blinking Hub/Switch Mode

Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port's LED indicator to blink

Cable Distance

Tests cables lengths of up to 300 meters (1,000 ft.)

Tone Generator

Compatible with TRENDnet's TC-TP1, Network Probe, to trace cables using two selectable tones

Test Pin Configuration	RJ45 EIA, TIA-568A/568B, and crossover cables RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61 USOC 2, 4, 6, and 8 Coax Video-BNC and CATV-F USB 3.0, USB 2.0
Transmitter Unit Interface	1 x RJ port 1 x USB 3.0/2.0 Type-A port 1 x USB 3.0/2.0 Type-B port Test button Mode button On/off button LED indicators Battery compartment Receiver unit attachment port
Remote Unit Interface	1 x RJ port 1 x USB 3.0/2.0 Type-A port
Compatible Cables*	Cat 8, 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e Coax Video-BNC and CATV-F cable (with included RJ45 to F adapters) RJ9, RJ11, RJ12, RJ14, RJ25, and RJ61 cables USOC 2, 4, 6, and 8 USB 3.0 A to B USB 2.0 A to B
Tone Frequency	600 – 1,000 Hz
Special Features	Tests grounding of shielded (screened) cables Identifies proper, severed, short circuit, and cross connected pins Continuous scan mode is design to accommodate testing with cable ends in different locations Manual scan is well suited for loop back cable testing Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode identifies connected hub/switch port Compatible with TRENDnet's TC-TP1, Network Probe, to trace cables using two selectable tones Tests cables lengths of up to 300 meters (1,000 ft.)
Power Source	Transmitter: 9 V DC battery (not included) Remote unit: No power needed
Operating Temperature	0 - 50 °C (32 - 122 °F)
Operating Humidity	Max. 95% non-condensing
Certifications	CE
Dimensions	Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 in.) Remote unit: 57 x 30 x 27 mm (2.2 x 1.2 x 1.1 in.)
Weight	Transmitter: 144 g (5.1 oz.) Remote unit: 26 g (0.9 oz.)
Warranty	1 year limited

PACKAGE CONTENTS

TC-NT3
Quick Installation Guide
2 x RJ45-to-F adapter
Network patch cable (15 cm/6 in.)
Carry pouch

*Not designed for live wires. Connecting tester to a live telephone wire may damage the tester.

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.