skip to main content
TRENDnet Store
Click to change country

16-Port Industrial Gigabit L2 Managed DIN-Rail Switch

TI-G160i-M   (Version v1.0R)

  • 16 x Gigabit ports
  • 32Gbps switching capacity
  • Hardened IP30 rated metal housing
  • Includes DIN-Rail mounting bracket
  • Operating temperature range of -10° – 75° C (14° – 167° F)
  • Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
  • IEEE 802.1p QoS with queue scheduling support
  • Bandwidth control per port
  • Redundant power inputs with overload current protection
  • Alarm output triggered by power failure
  • Power supply sold separately (models: TI-M6024, TI-S12024, TI-S12048, TI-S24048, TI-S15052, TI-S24052)
  • NDAA / TAA compliant (U.S. and Canada only)
  • Lifetime Warranty*
NDAA/TAA Compliant

DISCONTINUED PRODUCT

The TI-G160i-M (Version v1.0R) has been discontinued. For a list of discontinued products, click here.

Firmware

Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only

Model: TI-G160i-MHardware version: v1.0R
Firmware Version: 1.0.8.S0
Release Date: 6/2022
Notes:

  • -Initial Release

Filename: FW_TI-G160i-M_v1(1.0.8.S0).zip
SHA-1 Checksum: CD63E94A5D2C22340F67F3EAC7764C8A2208953E
Date: 7/1/2022
File Size: 6.78 MB
Download

Datasheet

Datasheet (English)
Filename: EN_datasheet_TI-G160i-M_(v1.0R).pdf
Date: 7/1/2022
File Size: 1.46 MB
Download Email
Datasheet (Français)
Filename: FR_datasheet_TI-G160i-M_(v1.0R).pdf
Date: 7/1/2022
File Size: 1.30 MB
Download Email
Datasheet (Deutsch)
Filename: GE_datasheet_TI-G160i-M_(v1.0R).pdf
Date: 7/1/2022
File Size: 1.29 MB
Download Email
Datasheet (Português)
Filename: PO_datasheet_TI-G160i-M_(v1.0R).pdf
Date: 7/1/2022
File Size: 1.20 MB
Download Email
Datasheet (Español)
Filename: SP_datasheet_TI-G160i-M_(v1.0R).pdf
Date: 7/1/2022
File Size: 1.15 MB
Download Email
Datasheet (Pусский)
Filename: RU_datasheet_TI-G160i-M_(v1.0R).pdf
Date: 7/1/2022
File Size: 1.63 MB
Download Email
Datasheet (Italiano)
Filename: IT_datasheet_TI-G160i-M_(v1.0R).pdf
Date: 7/1/2022
File Size: 1.29 MB
Download Email

Product Images

PNG Image
File Size: : 6.40 MB
Date: : 7/1/2022
Download
PNG Image
File Size: : 3.65 MB
Date: : 7/1/2022
Download
PNG Image
File Size: : 6.75 MB
Date: : 7/1/2022
Download
PNG Image
File Size: : 2.78 MB
Date: : 7/1/2022
Download
PNG Image
File Size: : 8.54 MB
Date: : 7/1/2022
Download
ROHS compliant Non-Disposable
Where would I find management login information for this switch?
You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
How do I reset the switch to factory default settings?
If the password has been lost for the TI-G160i you will need to contact support services to reset the Switch back to default settings....
Why can I only get internet on one device with this switch?
A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
Where would I find more detailed information on this switch including dip switch settings?
You can find detailed product specifications on our website under the Products section. You can find a detailed dip Switch legend under the product specifications and in the user's guide available for download from our website under the Support section....
What makes this a hardened or industrial product?
Hardened products are designed to withstand harsh industrial environments. Check the product specifications for IP ratings, extreme operating temperature ranges and power options....
What power input voltages are supported?
Hardened appliances will require 12 – 57 V DC. Always check detailed product specifications on our website under the Products section. The TI-G160i-M has a power input of 12 – 60 V DC using the TI-M6024 power supply, sold separately....
Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.1ax
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3az
Device Interface
  • 16 x Gigabit ports
  • 6-pin removable terminal block (primary/RPS power inputs & alarm relay output)
  • DIP switch (Alarm for Primary/RPS power)
  • LED indicators
  • Reboot button
Data Transfer Rate
  • Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
  • Gigabit Ethernet: 2000Mbps (full duplex)
Performance
  • Switch fabric: 32Gbps
  • RAM buffer: 512KB
  • MAC address table: 8K entries
  • Jumbo frames: 10KB
  • Forwarding mode: store and forward
  • Forwarding rate: 23.8Mpps (64-byte packet size)
Management
  • HTTP web based GUI
  • CLI: Telnet / SSHv2
  • SNMP v1, v2c, v3
  • SNMP trap (up to 5 receivers)
  • RMON groups 1/2/3/9
  • Device configuration backup & restore, upgrade firmware, reboot, and reset to default
  • Multiple administrative or read-only user accounts
  • Enable or disable power saving mode per port
  • Static MAC entries
  • Static unicast entries
  • LLDP (Link layer discovery protocol)
  • Netlite device map
  • ONVIF device discovery
  • SNTP
  • SMTP alert
  • Syslog
  • Port statistics/utilization
  • Traffic monitor
  • Port mirror: one to one, many to one
  • Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
  • Loopback detection
  • DHCP relay/option 82
  • Modbus/TCP
  • ERPS (Ethernet Ring Protection Switching) G8032v2
MIB
  • MIB II RFC 1213
  • Bridge MIB RFC 1493
  • RMON (Group 1,2,3,9) RFC 2819 RFC 1757
Spanning Tree
  • IEEE 802.1d STP (spanning tree protocol)
  • IEEE 802.1w RSTP (rapid spanning tree protocol)
  • BPDU filter, guard, and root guard
Link Aggregation
  • Static link aggregation and 802.1ax/802.3ad dynamic LACP (Up to 8 groups)
Quality of Service (QoS)
  • 802.1p Class of service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth control per port
  • Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
VLAN
  • 802.1Q tagged VLAN
  • MAC-based VLAN
  • Port isolation
  • Up to 256 VLAN groups, ID range 1-4094
Multicast
  • IGMP snooping v1, v2, v3
  • IGMP querier
  • IGMP fast/immediate leave
  • Up to 256 multicast groups
  • Static multicast entries
Access Control
  • 802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
  • DHCP snooping/screening
  • Trusted host/IP access list for management access
  • Port Security/MAC address learning restriction (Up to 100 entries per port)
  • Static/dynamic ARP inspection
ACL
  • Source/Destination MAC address
  • Source/Destination IP address
  • Source Interface
  • VLAN ID
  • EtherType
  • TCP/UDP port 1-65535
Special Features
  • Netlite device discovery and map display in GUI
  • Port security: MAC address learning restriction per port
  • DHCP relay/option 82 & DHCP server snooping/screening support
  • Wide operating temperature range
  • Redundant power inputs
  • Alarm relay triggered by power failure
  • Surge and ESD protection
Power
  • PWR (Primary) terminal input: 12 – 60V DC (TI-S12048 sold separately)
  • RPS (Redundant) terminal input: 12 – 60V DC (TI-S12048 sold separately)
  • Compatible power supply: TI-M6024 (60W), TI-S12048 (120W), TI-S24048 (240W) sold separately
  • Max. Consumption: 12W
Terminal Block
  • Redundant power inputs, alarm relay contact, 6 pin
  • Wire range: 0.5 mm^2 to 2.5 mm^2
  • Solid wire (AWG): 12-26
  • Stranded wire (AWG): 12-26
  • Wire strip length: 10-11mm
DIP Switch
SwitchStatusFunction
1OFFDisable alarm relay for PWR power input
ONEnable alarm relay for power failure on PWR power input
2OFFDisable alarm relay for RPS power input
ONEnable alarm relay for power failure on RPS power input
Alarm Relay Output
  • Relay outputs with current carrying capacity of 1A, 24V DC
  • Short circuit mode when one power source is connected
  • Open circuit mode when two power sources are connected
Enclosure
  • IP30 rated metal enclosure
  • Fanless passive cooling
  • DIN-Rail mount
  • Grounding Point
  • ESD (Ethernet) Protection: 8KV DC
  • Surge (Power) Protection: 6KV DC
MTBF
  • 1,072,674 hours @ 25° C
  • 177,143 hours @ 75° C
Operating Temperature
  • -10° – 75° C (14° – 167° F)
Operating Humidity
  • Max. 95% non-condensing
Dimensions
  • 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
Weight
  • 884 g (1.95 lbs.)
Certifications
  • CE
  • FCC
  • Shock (IEC 60068-2-27)
  • Freefall (IEC 60068-2-32)
  • Vibration (IEC 60068-2-6)
Warranty

PACKAGE CONTENTS
  • TI-G160i-M
  • DIN-Rail mounting bracket
  • Quick Installation Guide

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.