_d01_2.webp)
_d02_2.webp)
_d03_2.webp)
_d04_2.webp)
_d05_2.webp)
_d06_2.webp)
_d07_2.webp)
_d08_2.webp)
_d09_2.webp)
6-Port Hardened Industrial Gigabit PoE+ Layer 2 Managed DIN-Rail Switch
TI-PG541i (Version v2.6R)
- Hardened IP30 rated metal enclosure with integrated DIN-Rail mount
- Wide operating temperature range - 40 to 70 °C (-40 to 158 °F)
- 4 x Gigabit PoE+ (802.3at) ports, 1 x Gigabit port, and 1 x Gigabit SFP slot
- 120W total power budget
- Remote cloud management with TRENDnet Hive (Additional fee applies)
- Dual redundant power inputs and alarm relay output
- CLI (Telnet), Web (HTTP), SNMP v1/2c management
- 802.1Q/MAC-Based VLAN and IGMP Snooping support
- 802.1p/DSCP/Queue Scheduling (SP/WFQ/WRR) QoS support
- Power supply sold separately (models: 48VDC3000/TI-S24048)
- NDAA / TAA compliant (U.S. and Canada only)
- Lifetime Warranty*
Firmware
DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware Version: 1.0.15.S0
Release Date: 04/2025
Release Note:
- Updated GUI
- Added Hive cloud management
Note: If upgrading to firmware 1.0.15.S0 or above from firmware 1.0.14.S0 or below, it is recommended to reset the device to factory default after upgrading. Firmware 1.0.15.S0 or above allows the device to be registered and managed through TRENDnet Hive cloud management.
Filename: FW_TI-PG541i_v1(1.0.15.S0).zip
SHA-1 Checksum: C80F153506F86D7CFEB4484BE74A27FC0B7A2AEB
Date: 4/22/2025
File Size: 11.13 MB
Datasheet
Filename: EN_datasheet_TI-PG541i_(v2.6R).pdf
Date: 4/22/2025
File Size: 922.58 KB
Filename: FR_datasheet_TI-PG541i_(v2.6R).pdf
Date: 4/22/2025
File Size: 860.29 KB
Filename: GE_datasheet_TI-PG541i_(v2.6R).pdf
Date: 4/22/2025
File Size: 934.40 KB
Filename: PO_datasheet_TI-PG541i_(v2.6R).pdf
Date: 4/22/2025
File Size: 907.46 KB
Filename: SP_datasheet_TI-PG541i_(v2.6R).pdf
Date: 4/22/2025
File Size: 836.58 KB
Filename: IT_datasheet_TI-PG541i_(v2.6R).pdf
Date: 4/22/2025
File Size: 1.01 MB
Quick Installation Guide
Filename: Industrial_PoE_L2_Managed_Switches_(V2).pdf
Date: 4/22/2025
File Size: 16.51 MB
Product Images
_d01_1.webp)
_d02_1.webp)
_d03_1.webp)
_d04_1.webp)
_d05_1.webp)
_d06_1.webp)
_d07_1.webp)
_d08_1.webp)
_d09_1.webp)
Yes, if the primary power supply fails for any reason the secondary power supply will take over with the intention of increasing system reliability....
The switch housing is made to withstand many industrial environments and temperatures of 40 to 75 °C (-40 to 167 °F) ...
A power supply is not included. Many installations scenarios will have power readily available. If power is not available we do offer the TI-S24048 power supply....
The maximum PoE power budget is 120 Watts.
You will find management login and default settings in the quick installation guide and user's guide. Included with the switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
If the password has been lost for the TI-PG541i you will need to contact support services to reset the switch back to default settings....
A switch cannot share an IP address provided by your ISP with multiple devices. You will need a router to share your Internet service with multiple devices. The switch can be used to expand the amount of available ports on your network....
Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TI-PG541i power budget is 120 Watts total us...
You can find detailed product specifications on our website under the Products section. You can find a detailed dip switch legend under the product specifications and in the user's guide available for download from our website under the Support section....
TRENDnet PoE switches will support 802.3af, 802.3at or both. Please check detailed product specifications under the Product section of our website. If your device is not standard PoE compliant it will not be compatible with TRENDnet PoE switches. Many non-standard PoE devices use passive or propriet...
Hardened products are designed to withstand harsh industrial environments. Check the product specifications for IP ratings, extreme operating temperature ranges and power options....
Hardened PoE appliances will require 24 – 57 V DC. Hardened non-PoE appliances typically support 12 – 56 V DC. Always check detailed product specifications on our website under the Products section. The TI-PG541i has a power input of 48 – 57 V DC using the TI-S24048 power supply, sold separately....
The TI-PG541i power budget is 120 Watts total using the TI-S24048 power supply, sold separately. You can also supply power to hardened devices with existing electrical systems. Be sure to check detailed product specifications on our website under the Products section for exact power requirements....
| Standards |
|
|---|---|
| Device Interface |
|
| Data Transfer Rate |
|
| Performance |
|
| Management |
|
| Hive Enabled Management |
|
| MIB |
|
| Quality of Service (QoS) |
|
| VLAN |
|
| Multicast |
|
| Special Features |
|
| Power |
|
| Optional Power Adapter (48VDC3000 sold separately) |
|
| Optional Power Supply (TI-S24048 sold separately) |
|
| PoE |
|
| Enclosure |
|
| MTBF |
|
| Operating Temperature |
|
| Operating Humidity |
|
| Dimensions |
|
| Weight |
|
| Certifications |
|
| Warranty |
PACKAGE CONTENTS |
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
