"Warning"

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only.

Step 1 Open your web browser and type the IP address of the TV-IP100 (C1) in the address bar. The default IP address is 192.168.0.20.

Step 2 Click "System Administration".

Step 3 Click "Tools" in the top menu bar then "Firmware Upgrade" on the left hand side of the screen.

Step 4 Click "Browse" and locate the firmware file and click open.

Step 5 Click "Upgrade".