How do I configure a VPN tunnel when one side has a dynamic IP address?
FAQ ID: 764 Updated: 1/30/2006 7:56:18 PM
Use the following screenshots as a guide
Scenario
PC1 (192.168.1.x)-BRV204 (dynamic) ~ BRV304 (64.11.212.22)–PC 2 (192.168.2.x) Simply match both ends information. After the connections are created, 192.168.1.x should be able to ping 192.168.2.x.
Important Note:
1. Please match Local/Remote Identity
2. Please match the Pre-Shared Key
3. Please match the Authentication and Algorithm
4. Dynamic side would be the Initiator for Direction
5. Static IP side would be the Responder for Direction
6. When there is a dynamic connection, it would be Aggressive Mode for Exchange Mode
Settings on BRV204
Settings on BRV304
Related FAQs:
- When I attempt to access http://192.168.0.1 with my web browser, an error message tells me "The page cannot be displayed." How can I get into the TW100-BRV304 web configuration page?
- How do I connect using a the Microsoft VPN Client?
- How do I configure a VPN tunnel with both sides having static IP addresses?
- I set up my Internet Connection Type and saved it, but I still cannot access the Internet with my PC. What should I do?
- How do I forward ports in my TW100-BRV204/304?
Attachments:
No attachments found.