"Warning"
DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only.

Step 1 Start the IPView Pro Program by going to Start>Programs>IPView Pro>IPView Pro.

Step 2 Click on the "System Configuration" button.

Step 3 Click "System" then "Tools".

Step 4 Click "Browse" and locate the firmware file and click open.

Step 5 Click "Update".

NOTE: An alternative way to upgrade the firmware is to open your web browser and type the IP address of the TV- IP201 (w) in the address bar. The default IP address is 192.168.0.30. Click on "System" then "Tools" on the left hand side of the screen. Browse to the location of the firmware then click "Update".