TRENDnet | Support | FAQ | TV-IP201W | How do I configure my TV-IP201 (w) series cameras to upload snapshots to an FTP server?
How do I configure my TV-IP201 (w) series cameras to upload snapshots to an FTP server?
FAQ ID: 1313   Updated: 4/24/2007 2:48:52 AM

Step 1 Open your web browser and type the IP address of the TV-IP201 (w) in the address bar. The default IP address is 192.168.0.20.

Step 2 Click "System Administration".

Step 3 Click on "Upload" on the left hand side of the screen. Fill in the FTP section and then click "Save".

Step 4 Enter in a schedule or configure a manual upload. To initiate the manual upload do the following.

a) Open your web browser and type the IP address of the TV-IP201 (w) in the address bar. The default IP address is 192.168.0.30.
b) Click on either Active X mode or Java mode.

c) To start the manual upload, click "On" next to "Image upload".


Was this information helpful?
Related FAQs:
Attachments:
No attachments found.