Open your web browser and type the IP address of the TWG-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). NOTE: If the Setup Wizard starts, click on Cancel.

1.  Put a check mark in the Enable box. Rename the service, select the PC that you want the port forwarded too, select TCP, UDP or both TPC/UDP for the protocol, then input the port (if it's a single port, enter the port in both box's and the port range in the Internal LAN Ports or input the port if in a range), input the port needed on the External WAN Port (this port is usually the same port as the LAN port), then click Add as new Server.