The main screen enables you to configure the LAN & DHCP Server, set WAN parameters, create Administrator and User passwords, and set the local time, time zone, and default NTP server. Click the items below for more information:
This page enables you to set LAN and DHCP properties, such as the host name, IP address, subnet mask, and domain name. LAN and DHCP profiles are listed in the DHCP table at the bottom of the screen. Host Name: Type the host name in the text box. The host name is required by some ISPs. The default host name is "AP-Router." IP Address: This is the IP address of the router. The default IP address is 192.168.1.1. Subnet Mask: Type the subnet mask for the router in the text box. The default subnet mask is 255.255.255.0. DHCP Server: Enables the DHCP server to allow the router to automatically assign IP addresses to devices connecting to the LAN. DHCP is enabled by default. All DHCP client computers are listed in the table at the bottom of the screen, providing the host name, IP address, and MAC address of the client. Start IP: Type an IP address to serve as the start of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the router. End IP: Type an IP address to serve as the end of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the router. Domain Name: Type the local domain name of the network in the text box. This item is optional.
This screen enables you to set up the router WAN connection, specify the IP address for the WAN, add DNS numbers, enter the MAC address, and set the MTU. Connection Type: Select the connection type, either DHCP client/Fixed IP or PPPoE from the drop-down list. When using DHCP client/Fixed IP, enter the following information in the fields (some information is provided by your ISP): Select whether you want to specify an IP address manually, or want DHCP to obtain an IP address automatically. When Specify IP is selected, type the IP address, subnet mask, and default gateway in the text boxes. Your ISP will provide you with this information. DNS 1/2/3: Type up to three DNS numbers in the text boxes. Your ISP will provide you with this information. If required by your ISP, type the MAC address of the router WAN interface in this field. Type the MTU value in the text box. When using PPPoE, enter the following information in the fields (some information is provided by your ISP): WAN IP: Select whether you want the ISP to provide the IP address automatically, or whether you want to assign a static IP address to the router WAN. When Specify IP is selected, type the PPPoE IP address in the text box. Your ISP will provide you with this information. Type up to three DNS numbers in the text boxes. Your ISP will provide you with this information. User Name: Type your PPPoE user name. Password: Type your PPPoE password. Connect on Demand: Enables or disables the connect on demand function, which enables the the router to initiate a connection with your ISP when an Internet request is made to the router. When enabled, the router automatically connects to the Internet when you open your default browser. Idle Time Out: Specify the time that will elapse before the router times out of a connection. MTU: Type the MTU value in the text box.
This screen enables you to set administrative and user passwords. These passwords are used to gain access to the router interface. Administrator: Type the password the Administrator will use to log in to the system. The password must be typed again for confirmation. User: Users can type a password to be used for logging in to the system. The password must be typed again for confirmation. Note: Users do not have permission to configure router functions.
This screen enables you to set the time and date for the router's realtime clock, select your time zone, specify an NTP server, and enable or disable daylight saving. Local Time: Displays the local time and date. Time Zone: Select your time zone from the drop-down list. Default NTP Server: Type the NTP server address in the text box to enable the router to automatically set the time from the Internet NTP server. Set the Time: Select the date and time from the drop-down lists, and click Set Time to set the router's internal clock to the correct date and time. Daylight Saving: Enables you to enable or disable daylight saving time. When enabled, select the start and end date for daylight saving time.
Dynamic DNS (Domain Name Service) is a method of keeping a domain name linked to a changing (dynamic) IP address. With most Cable and DSL connections, you are assigned a dynamic IP address and that address is used only for the duration of that specific connection. With the DI-624, you can setup your DDNS service and the DI-624 will automatically update your DDNS server every time it receives a different IP address.
|