TRENDnet TEW-633GR EWC Router | Advanced / Inbound Filter

Inbound Filter

The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range.

Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used with Virtual Server, Port Forwarding, or Remote Administration features.

Add Inbound Filter Rule

Name :

Action :

Source IP Range :

Enable	Source IP Start	Source IP End

Inbound Filter Rules List

Name	Action	Source IP Range

Helpful Hints...

Give each rule a Name that is meaningful to you.

Each rule can either Allow or Deny access from the WAN.

Up to eight ranges of WAN IP addresses can be controlled by each rule. The checkbox by each IP range can be used to disable ranges already defined.

The starting and ending IP addresses are WAN-side address.

Click the Save button to store a finished rule in the Rules List below.

Click the Edit icon in the Rules List to change a rule.

Click the Delete icon in the Rules List to permanently remove a rule.

More...

Configuration Warnings

Add Inbound Filter Rule