TRENDnet TEW-633GR EWC Router | Basic / Wireless Settings

Wireless Network Settings

Use this section to configure the wireless settings for your TRENDnet Router. Please note that changes made on this section may also need to be duplicated on your Wireless Client.

Wireless Connection Wizard

If you would like to utilize our easy to use Web-based Wizards to assist you in configuring the Wireless settings, click on the Setup Wizard button below.

Wireless Network Settings

Enable Wireless :
Wireless Network Name :	(Also called the SSID)
Enable Auto Channel Scan :
Wireless Channel :
Super G™ Mode :
802.11 Mode :
Channel Width :
Transmission Rate :	(Mbit/s)
Number of Spatial Streams :
Visibility Status :	Visible Invisible

Wireless Security Mode

To protect your privacy you can configure wireless security features. This device supports two wireless security modes including: WPA-Personal, and WPA-Enterprise. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option requires an external RADIUS server.

Security Mode :

WEP

WEP is the wireless encryption standard. To use it you must enter the same key(s) into the router and the wireless stations. For 64 bit keys you must enter 10 hex digits into each key box. For 128 bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. For the most secure use of WEP set the authentication type to "Shared Key" when WEP is enabled.

You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64 bit keys, and a maximum of 13 characters for 128 bit keys.

If you choose the WEP security option this device will ONLY operate in Legacy Wireless mode (802.11B/G). This means you will NOT get 11N performance due to the fact that WEP is not supported by 11N specification.

WEP Key Length :	(length applies to all keys)
WEP Key 1 :
WEP Key 2 :
WEP Key 3 :
WEP Key 4 :
Default WEP Key :
Authentication :

Helpful Hints...

Changing your Wireless Network Name is the first step in securing your wireless network. Change it to a familiar name that does not contain any personal information.

If you are not utilizing Super G with Dynamic Turbo for it's speed improvements, enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on.

Enabling Hidden Mode is another way to secure your network. With this option enabled, no wireless clients will be able to see your wireless network when they scan to see what's available. For your wireless devices to connect to your router, you will need to manually enter the Wireless Network Name on each device.

If you have enabled Wireless Security, make sure you write down the WEP Key or Passphrase that you have configured. You will need to enter this information on any wireless device that you connect to your wireless network.

More...

Configuration Warnings