TRENDnet TEW-633GR EWC Router | Basic / Internet Connection Setup Wizard

Step 2: Select your Time Zone

Select the appropriate time zone for your location. This information is required to configure the time-based options for the router.

Step 3: Configure your Internet Connection

Your Internet Connection could not be detected, please select your Internet Service Provider (ISP) from the list below. If your ISP is not listed; select the "Not Listed or Don't Know" option to manually configure your connection.

If your Internet Service Provider was not listed or you don't know who it is, please select the Internet connection type below:

	DHCP Connection (Dynamic IP Address) Choose this if your Internet connection automatically provides you with an IP Address. Most Cable Modems use this type of connection.
	Username / Password Connection (PPPoE) Choose this option if your Internet connection requires a username and password to get online. Most DSL modems use this type of connection.
	Username / Password Connection (PPTP) PPTP client.
	Username / Password Connection (L2TP) L2TP client.
	Static IP Address Connection Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually configured.
	BigPond BigPond Cable (Australia)

DHCP Connection (Dynamic IP Address)

To set up this connection, please make sure that you are connected to the TRENDnet Router with the PC that was originally connected to your broadband connection. If you are, then click the Clone MAC button to copy your computer's MAC Address to the TRENDnet Router.

MAC Address :	(optional)
Host Name :

Note: You may also need to provide a Host Name. If you do not have or know this information, please contact your ISP.

Set Username and Password Connection (PPPoE)

To set up this connection you will need to have a Username and Password from your Internet Service Provider. If you do not have this information, please contact your ISP.

Address Mode :	Dynamic IP Static IP
IP Address :
User Name :
Password :
Verify Password :
Service Name :	(optional)

Note: You may also need to provide a Service Name. If you do not have or know this information, please contact your ISP.

Set Username and Password Connection (PPTP)

To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need PPTP IP adress. If you do not have this information, please contact your ISP.

Address Mode :	Dynamic IP Static IP
PPTP IP Address :
PPTP Subnet Mask :
PPTP Gateway IP Address :
PPTP Server IP Address (may be same as gateway) :
User Name :
Password :
Verify Password :

Set Username and Password Connection (L2TP)

To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need L2TP IP adress. If you do not have this information, please contact your ISP.

Address Mode :	Dynamic IP Static IP
L2TP IP Address :
L2TP Subnet Mask :
L2TP Gateway IP Address :
L2TP Server IP Address (may be same as gateway) :
User Name :
Password :
Verify Password :

Set Static IP Address Connection

To set up this connection you will need to have a complete list of IP information provided by your Internet Service Provider. If you have a Static IP connection and do not have this information, please contact your ISP.

IP Address :
Subnet Mask :
Gateway Address :
Primary DNS Address :
Secondary DNS Address :

Set BigPond Cable Connection

To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also need BigPond Server IP adress. If you do not have this information, please contact your ISP.

User Name :
Password :
Verify Password :
BigPond Server :

Configuration Warnings