Select the Settings icon from Main menu then select Networking Setup.

To connect to a wireless network without encryption do the following.

• Select SSID (Wireless Network Name)
• Select Auto Scan
• Choose the Wireless Network you want to connect to by highlighting it and press enter.
• After you have selected the Network press "Esc".
• Select Apply Settings and press enter.

To connect to a wireless network with WEP encryption, do the following.

• Select  SSID (Wireless Network Name)
• Select Auto Scan
• Choose the Wireless Network you want to connect to by highlighting it and press enter.
• After you have selected the Network press "Esc".
• Select Authentication Mode, choose the form of encryption used on the access point you are connecting to and press enter.
• Select Default Key ID and select Key 1 and press enter.
• Select Key Type and choose the setting used on the access point and press enter.
• Select Key and choose Key 1, enter in the encryption key and select enter.
• Press "Esc"
• Select "Apply Settings" and press enter.

To connect to a wireless network with WPA/WPA2 encryption, do the following.

• Select  SSID (Wireless Network Name)
• Select Auto Scan
• Choose the Wireless Network you want to connect to by highlighting it and press enter.
• After you have selected the Network press "Esc".
• Select Authentication Mode, choose the form of encryption used on the access point you are connecting to and press enter.
• Select Pre-Shared Key, select the mode and enter your Pre-Shared Key and press enter.
• Press "Esc"
• Select "Apply Settings" and press enter.