Search FAQs
Browse by Product
Does the TU2-ET100 (v3.0r) work with Mac OS/X 10.5?
FAQ ID: 1545 Product: TU2-ET100Updated:4/15/2008 12:34:43 AM
TU2-ET100 (V3.0r) will work with Mac OS/X 10.5. To install the TU2-ET100:
- Connect the TU2-ET100 into an available USB port on your computer.
- Drivers will install automatically.
- “A new network interface has been detected” window appears. Click “Network Preferences...”.
- The “Network” window appears. Verify “Configure” is set to “Using DHCP” and then click “apply”.
- Plug an Ethernet cable from the TU2-ET100 to an available Ethernet port on your network.
- Verify that the “100Mbps” and “Link” LEDs on the TU2-ET100 are lit green.
- On the “Network” window, verify that “status” shows “connected”. An IP Address, Subnet Mask and Router [address] should now appear.
Related FAQs:
- I have Windows XP and I followed the instructions in the Quick Installation Guide to install TU2-ET100 (v3), however, at the end of the installation, the "Found New Hardware Wizard" prompted "Windows could not load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)". After that, the screen shows a message "A problem occurred during the hardware installation. Your new hardware might not work properly.". How can I resolve this?
- Is the TU2-ET100 (v3) Linux compatible?
- Is the TU2-ET100 compatible with the PlayStation 3, XBOX 360, Nintendo Wii or any other game console?
- Is the TU2-ET100 (v3) Mac compatible?
- When I verify the installation of the TU2-ET100, I see an exclamation point on my network adapter. What should I do?
Attachments:
No attachments found.