Search FAQs
Browse by Product
FAQ Home Page > Switches > Unmanaged > TEG-S50g (v6.0R)
Browse TEG-S50g (v6.0R) Questions
There are 6 questions found in this category:

  1. Why can I only get internet on one device with this switch?
    A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
  2. How do I configure the TEG-S50g?
    The TEG-S50g is a non-manageable Switch. It is not configurable.
  3. Does the TEG-S50g support jumbo frames?
    The TEG-S50g supports jumbo frames up to 9KB.
  4. Can I share my Internet connection through the switch?
    To share an Internet connection you will need a Router. The TEG-S50g can be utilized to expand the available ports on your existing Router or network....
  5. Is there an uplink port on the TEG-S50g?
    All ports on the TEG-S50g support Auto-MDIX. All ports can be used as an uplink port.
  6. Which category of Ethernet cable should I use for gigabit performance?
    You will need to be running Cat-5e or higher cabling for gigabit speeds.