Search FAQs
Browse by Product
FAQ Home Page > Wired > Routers > TW100-S4W1CA
Browse TW100-S4W1CA Questions
There are 14 questions found in this category:

  1. How do put my computer in the DMZ on my TW100-S4W1CA?
    Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click LOGIN then click on Advanced Setup. Click on Firewall then DMZ on the left hand side of th...
  2. How do I forward ports in my TW100-S4W1CA
    Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click LOGIN then click on Advanced Setup. Next, click on NAT then Virtual Server. Input t...
  3. Where can I find the MAC Address of my TW100-S4W1CA?
    The MAC Address can be found on a label on the bottom of the router.  You can alternately find it by doing the following: Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and ...
  4. How do I configure the TW100-S4W1CA?
    Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight settings then click on the Control Panel. Double-Click on the Network Connection icon. Right-Click on the Local Area Connection icon then click on Properties.  Highlight the Internet Protocol (TCP/IP...
  5. How do I change the IP Address of my TW100-S4W1CA?
    Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click on LOGIN then click on Advanced Setup. Click on LAN and then LAN Settings on the left hand side...
  6. What is the default username and password for the TW100-S4W1CA?
    The default username & password for the TW100-S4W1CA is admin for the username and leave the password blank...
  7. What is the default IP address of my TW100-S4W1CA?
    The default IP address for the TW100-S4W1CA is 192.168.0.1.
  8. What can I do if I forgot my password or want to reset back to factory defaults?
    Locate the reset button on the back of the TW100-S4W1CA. Press and hold in the reset button for approximately 15 seconds. This will reset the unit back to its default configuration. ...
  9. How do I change the username & password on my TW100-S4W1CA?
    Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click LOGIN and click on Advanced Setup. Click on System on the left hand side. If the Cu...
  10. How do I configure the TW100-S4W1CA for a Cable connection using a Dynamic IP Address?
    Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address. Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password b...
  11. How do I configure the TW100-S4W1CA for a DSL, PPPoE connection?
    Open your web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is 192.168.0.1. At the LOGIN, input admin for the username and leave the password blank, click LOGIN and click on Advanced Setup. Next, click on WAN, PPPoE. Now input your Username and ...
  12. I set up my Internet Connection Type and saved it, but I still cannot access the Internet with my PC. What should I do?
    Turn off your Cable/DSL modem, Router, PC. Then, turn on the Cable/DSL modem and wait for 60 seconds. Next, turn on the router, wait 60 seconds, and turn on your PC. This simple power cycle normally helps the router connect to your Internet connection. Then, try accessing a website such as https://w...
  13. I don't know what my Internet Connection Type I have. How do I find out?
    You can simply contact your Internet Service Provider's (ISP) Customer Service or Technical Support Department for the correct information. ...
  14. When I attempt to access http://192.168.1.1 in my web browser, an error message tells me "The page cannot be displayed." How can I get into the TW100-S4W1CA web configuration page?
    Verify your hardware and TCP/IP settings again by reviewing the instructions in sections 1-3. Also, make sure the Power, WAN, and on the LAN lights on the Router's front panel are on. Then, try accessing https://192.168.1.1 again using your web browser....