Search FAQs
Browse by Product
FAQ Home Page > Wireless > Adapters > TEW-737HRE
Browse TEW-737HRE Questions
There are 8 questions found in this category:

  1. How do I setup a static IP address on my Mac?
    Step 1: Click the Apple logo in the top left corner of your screen.  Click SystemPreferences… and then Network under the Internet and Wireless section. Step 2: Select Ethernet in the left pane.  Under ConfigureIPv4 select Manually.  Assign the adapter the following IP address then click Apply. ...
  2. If I am unable to wirelessly connect to the TEW-737hre for the initial setup how should I proceed?
    Connect a computer directly to the TEW-737HRE's Ethernet port. Allow the TEW-737HRE to boot up and then enter https://tew-737hre into the address line of your browser. Note: If you have a Mac, you will have to setup a static IP address on your computer and use https://192.168.10.100 to access the ...
  3. The TEW-737HRE is not connecting to my existing wireless network. What should I check for?
    Please check your wireless router’s wireless settings, including the wireless network name (SSID), encryption type and encryption key. Match these settings on the TEW-737HRE. Also, check the wireless router and see if you have enabled additional security functions, e.g. MAC address filters, ...
  4. What is the proper placement of the TEW-737HRE to extend my wireless network?
    The TEW-737HRE extends a wireless network by repeating the wireless signal from your existing wireless network. It is not an antenna booster. Do not place it near your current wireless router or access point. After configuration, the unit should be placed where your current wireless signal starts ...
  5. What is the default IP address for the TEW-737HRE?
    The default IP address for the TEW-737HRE is https://192.168.10.100  The TEW-737HRE can also be accessed by typing https://tew-737hre in the address bar....
  6. How do I reset the TEW-737HRE to default settings?
    Press and hold the reset button located on the side of the TEW-737HRE for 15 seconds to reset it to default values. The default values are as follows: IP Address: 192.168.10.100 Username: admin Password: The password is printed on the side label of the TEW-737HRE. ...
  7. How do I configure the TEW-737HRE if my router does not support WPS or I do not use WPS?
    Plug in the TEW-737HRE to a power outlet. For EU versions, turn the device on as well. Connect a network cable from the TEW‐737HRE to your laptop/PC Open a web browser and type https://tew-737hre or https://192.168.10.100 Enter the Login information. By default the username and the pa...
  8. What should I do if I cannot connect the TEW-737HRE to my existing wireless network?
    Double check your wireless settings. Your existing wireless router or access point defines all your wireless settings, security measures and management features.  Please ensure you have taken these features into account as they can limit access to your network. Please also ensure you have placed t...