Search FAQs
Browse by Product
Browse TPE-1020SB (v1.0R) Questions
There are 7 questions found in this category:
There are 7 questions found in this category:
- Which PoE standards are supported and should I be concerned about voltage?The TPE-1020SB supports IEEE 802.3af, 802.3at and 802.3bt PoE standards. TRENDnet PoE Switches typically support IEEE industry standards. Please check detailed product specifications under the Product section of our website. If your device is not IEEE PoE compliant it may not be compatible with TREN...
- What is a PoE budget and how much does this switch have?Each Switch will have a maximum amount of power that can be supplied to powered devices. This is the overall amount of power for the entire Switch. Please check detailed product specifications for PoE budget under the Products sections of our website. The TPE-1020SB power budget is 180W....
- Can I share my Internet connection through the switch?To share an Internet connection you will need a Router. The TPE-1020SB can be utilized to expand the available ports on your existing Router or network....
- Does the TPE-1020SB support jumbo frames?The TPE-1020SB supports jumbo frames up to 9KB.
- Why can I only get internet on one device with this switch?A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
- Where would I find management login information for this switch?You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....
- How do I reset the switch to factory default settings?Only managed or web smart PoE Switches will have reset instruction. Unmanaged PoE Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or ...