Search FAQs
Browse by Product
FAQ Home Page > Fiber > Media Converter > TFC-1000MGA
Browse TFC-1000MGA Questions
There are 4 questions found in this category:

  1. Can the TFC-1000MGA with a gigabit SFP module be connected to fast Ethernet switch?
    Yes, the TFC-1000MGA is capable of negotiating a gigabit fiber connection to a 100Mbps copper connection. Note: Fiber port speed is not auto-negotiable. The speed is dictated by the SFP module. ...
  2. Which TRENDnet SFP modules are supported in a TFC-1000MGA?
    All current TRENDnet SFP modules are supported in the TFC-1000MGA. TEG-MGBSX https://www.TRENDnet.com/products/product-detail.asp?prod=200_TEG-MGBSXTEG-MGBS80https://www.TRENDnet.com/products/product-detail.asp?prod=195_TEG-MGBS80TEG-MGBS40D35 https://www.TRENDnet.com/products/product-detail.asp?pr...
  3. How do I set the dip switches on the TFC-1000MGA?
    Switch settingsThere is a two pin DIP switch on the module which is defined as Switch 1 and Switch 2: Switch 1 LLCF On LLCF Enabled Off LLCF Disabled Switch 2 Fiber mode switch On Forced mode Off Auto-negotiation mode  Note: When connecting 2 TFC-1000MGA's together Switch 2 must be the...
  4. What do the LED’s on the TFC-1000MGA represent?
    The TFC-1000MGA has the following LED's. LEDs Status Indication PWR LED on Power on LED off Power off Speed(on TX port) LED on Runs at 1000M Gigabit Ethernet mode LED off Runs at 10M Ethernet or 100M Fast Ethernet mode Speed(on FX port) LED on Runs at 1000M Gigabit Ethernet mode LED of...