Search FAQs
Browse by Product
FAQ Home Page > Fiber > SFP & SFP+ > TEG-MGBS20
Browse TEG-MGBS20 Questions
There are 4 questions found in this category:

  1. What type of fiber connector is used on the TEG-MGBS20?
    TRENDnet SFP module TEG-MGBS20 has an LC type connector.
  2. Are TRENDnet modules compatible with third party switches?
    While TRENDnet cannot guarantee compatibility with third party hardware, TRENDnet does not employ or implement proprietary mechanisms within our SFP modules. If the third party Switch adheres to specifications and also does not use proprietary measures they should be compatible....
  3. How do I determine which TRENDnet SFP module will be compatible with my existing fiber cable?
    You will need to identify the type of fiber cable you have. Whether it is multi-mode or single mode, if it is 62.5/125 μm or 50/125 μm, etc. Typically you can verify the cable type from the cable jacket, your network documentation or the specifications of the devices you currently have con...
  4. How do I make a successful link with my TRENDnet SFP module?
    Transmit and Receive connectors will be inverted on the remote side. The fiber will not link if you connect a Transmit and Receive interface to the Transmit and Receive interface on the remote side. They should be connected TX to RX and RX to TX....