Search FAQs
Browse by Product
Browse TEG-3102WS Questions
There are 7 questions found in this category:
There are 7 questions found in this category:
- Why can I only get internet on one device with this switch?A Switch cannot share an IP address provided by your ISP with multiple devices. You will need a Router to share your Internet service with multiple devices. The Switch can be used to expand the amount of available ports on your network....
- Does the TEG-3102WS support jumbo frames?The TEG-3102WS supports jumbo frames up to 10KB.
- Can I share my Internet connection through the switch?To share an Internet connection you will need a Router. The TEG-3102WS can be utilized to expand the available ports on your existing Router or network....
- Which category of Ethernet cable should I use for 2.5GBASE-T performance?You will need to be running Cat-5e or higher cabling for 2.5GBASE-T.
- Why Windows is showing that my computer’s network connection is 1.0 Gbps instead of 2.5 Gbps?Please check your network adapter's specification and make sure that it supports 2.5 Gbps. Also, check if your network cable is Cat-5e or higher....
- How do I reset the switch to factory default settings?Only managed or web smart switches will have reset instruction. Unmanaged Switches are not configurable and do not have settings to reset. Your Switch will have a reset button. This button is typically recessed and located on the front or the back of the Switch. You will need a small pin or paper cl...
- Where would I find management login information for this switch?You will find management login and default settings in the quick installation guide and user's guide. Included with the Switch is a hard copy of the quick installation guide. The user's guide is available for download from our website under the Support section....