The TEW-713RE is an N150 device with only 1 antenna to transmit and receive wireless signals simultaneously. Your router may employ more antennas to transmit and receive signals and provides a higher connection and throughput speed....

When you start your computer it will look at your saved or preferred networks and connect to the one with the strongest signal. It will not switch to another access point or wireless router until the signal is too weak to connect. When this happens, it will look at your saved or preferred networks a...

The TEW-713RE extends a wireless network by repeating the wireless signal from your existing wireless network. It is not an antenna booster. Do not place it near your current wireless router or access point. After configuration, the unit should be placed where your current wireless signal starts t...

The default IP address for the TEW-713RE is 192.168.10.100. During the initial configuration you can also login to the TEW-736RE by typing "tew-736re.TRENDnet" in the address bar of your browser window....

The default username and password are both admin.

Press and hold the reset button located on the bottom of the TEW-713RE for 15 seconds to reset it to default values. The default values are as follows: IP Address: 192.168.10.100 Username: admin Password: admin ...

Plug in the TEW-713RE to a power outlet. Connect a network cable from the TEW‐713RE to your laptop/PC Open a web browser and type https://tew-713re or https://192.168.10.100 Enter the Login information. By default the username and password is admin Click on Wireless then Site ...

Your existing wireless router or access point defines all your wireless settings, security measures and management features. Please ensure you have taken these features into account as they can limit access to your network. Please also ensure you have placed the TEW-713RE within range of the wirele...