Step 1 Open your web browser and type the IP address of the TV-IP300(w) in the address bar. The default IP address is 192.168.0.30.

Step 2 Click on “System Administration”.

Step 3 Click on the Motion Detection link at the top of the page.

Step 4 Place a check mark in “Enable Motion detection” and click save.

Step 5 Click on New to define a motion detection area.

Step 6 Input a name in the “Window Name” field.

Step 7 Change the dimensions of the motion detection area to meet your requirements by clicking and dragging the window.

Step 8 Adjust the Sensitivity and Percentage values to meet your requirements.

Step 9 Click “Save”.

Note: The Sensitivity rating determines the amount of motion in the created window to activate motion.  Setting it too high or too low may result in unexpected results.

Note: The Percentage rating determines the amount of space in the window that has to have motion to activate motion detection. 

Example:  Sensitivity rating of 95% with a percentage of 2%.  With these settings 2% of the window must meet the 95% sensitivity rating to active motion detection.