To connect at 300Mbps your wireless client must support 802.11n speeds up to 300Mbps as well. For 802.11n performance you will also need to use WPA2 AES encryption. Using a legacy form of encryption will cause it to fall back to legacy 802.11 modes.
Log in to the wireless Router by entering https://192.168.10.1 into the address line of your browser.
The default System Password is admin.
After you have logged into the Router click on Configuration >BasicSetting >Wireless. For 802.11n performance select WPA2-PSK under Authentication. For encryption select AES. Set the Pre-Shared Key. The Pre-Shared Key must be at least 8 characters long. Please remember or write this down. Any wireless device connecting to the Router will be prompted for this key.
- My computer is asking for an 8-digit-PIN from the router when I try to establish a wireless connection. What does this mean and where do I find it?
- How do I secure my wireless network?
- How do I configure VPN tunnels with the TEW-659BRV?
- How do I forward ports?
- What is the default System Password on the TEW-659BRV?