Search FAQs
Browse by Product
FAQ Home Page > Switches > Unmanaged > TE100-S5
Why can’t I get a link light when I plug in my network device?
FAQ ID: 3075 Product: TE100-S5Updated:3/27/2014 5:29:57 PM

Please check the following:

  1. Please make sure that the cable is seated properly on both ends.
  2. Make sure that you are using a known working cable.
  3. If possible please try plugging in a known working device in the port you are having issues with to see if the problem follows the Switch or the device.
Was this information helpful?
Related FAQs:
Attachments:
No attachments found.