1. Make sure that on the print server, the Switch is set to Diag, unplug the unit for 15 seconds then apply the power.

Note: The unit will broadcast its default SSID of WLAN-PS.

2. Perform a site survey from your wireless network adapter and connect to the WLAN-PS network.

3. Insert the Setup CD into your CD-ROM drive.

4. Run the setup.exe from Windows 95/98/Me/NT/2000/XP/2003. The Network Print Monitor for Windows welcome message then appears. Choose Install Setup Utility or Manual Installation.

5. Choose Install Setup Utility, the program will auto install the Network Print Monitor, PS Admin and Setup Wizard into your computer. The default installation directory will be C:\Program files\Network Print Monitor.

6. After installation completes, the Setup Wizard message appears.

7. Click Wireless Setup Wizard and the following message appears.

8. Click NEXT; the wizard will automatically discover the wireless print server.

9. Select the print server, which you want to configure and press NEXT.

10. Select YES if you want to change the configuration and press NEXT then the following window appears. For communication type please choose Infrastructure. For SSID, Input the proper SSID of your wireless network. Click NEXT.

11. Choose Enable WEP Encryption as you need, and click NEXT.

12. Specify a fixed IP address or use dynamic IP address, then click NEXT.