Step 1 Log into the Router by entering its IP address into a browser. The default IP address is https://192.168.1.1. The default username leave blank with a password of (admin).

Step 2 Click on "Wireless" on top, and then click on "Wireless Security".

Step 3 Enter in the desired encryption values then click "Apply".

Examples:

Authentication type: WEP
WEP Type: Open System

Mode: Hex

WEP Key: 64-bit

Key 1: 0000000000

Note: For WEP you can choose ASCII or HEX modes.

64bit ASCII = 5 digit ASCII key.

64bit HEX = 10 digit HEX key. (Can only use letters A~F and numbers)

128bit ASCII = 13 digit ASCII key.

128bit HEX = 26 digit HEX key. (Can only use letters A~F and numbers)

You can also choose WPA-PSK. The key must be between 8~64 digits.

Authentication type: WPA-PSK

Passphrase: omg laserbeams pew pew pew

Confirm passphrase: omg laserbeams pew pew pew