Step 1 Log into the Router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).

Step 2 Click on "Wireless" on the left hand side then click on "Security" below wireless. Next select "Security" from the drop down.

Step 3 Enter in the desired encryption values then click "Apply".

WEP Example

Note: For WEP you can choose ASCII or HEX modes.

64bit ASCII = 5 digit ASCII key.
64bit HEX = 10 digit HEX key. (Can only use letters A~F and numbers)

128bit ASCII = 13 digit ASCII key.
128bit HEX = 26 digit HEX key. (Can only use letters A~F and numbers)

WPA-PSK/WPA2-PSK Example

Step 1 Log into the Router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).